Parts

Pedals.

Related Searches:
fraust Joined: A long time ago... Posts: 291 Location:	Date: 2007-01-08 01:18:10 Topic: Pedals.
fraust Joined: A long time ago... Posts: 291 Location:	Alright. So I got a pair of sealed Primo Tenderizers from my friend to replace my unsealed Mosh Steps. I got the right arm off fine. The left won't budge. I don't know if I'm trying to loosen it the wrong way, or if I'm not exerting myself enough. I would think that it would be reverse threaded, but I tried it both ways and they still won't budge. Any help would be appreciated. And if not, Imma have to go to the team mechanic.
Dead Sailor Joined: A long time ago... Posts: 765 Location: Tampa	Date: 2007-01-08 12:29:59 Topic: Re: Pedals.
	if your looking at the bike from its left side. you turn the wrench clock wise for theleft pedal. try to get someone to hold the other crank arm and put a pipe or something on the end of the wrench so you can get more leverage on it. if that dont do it you can try getting another pipe and putting it on the crank arm too i guess you could spray some wd40 on it and leat it soak....maybe thatil help...im not a big fan of wd40. 'liquid wrench' is better but not somethign you would have handy when you put on your new pedals make sure to grease the threads. otherwise theyll sieze up and be a pain to take off
fraust Joined: A long time ago... Posts: 291 Location:	Date: 2007-01-09 00:54:16 Topic: Re: Pedals.
fraust Joined: A long time ago... Posts: 291 Location:	Nevermind. I'm just gonna get some S&M cranks.
freeagentbikes17 Joined: A long time ago... Posts: 109 Location: la verne, so cal.	Date: 2007-01-15 02:25:54 Topic: Re: Pedals.
	id you do take the pedals off, that appened to me too. you put the crank arm in the vice, blowtorch it and put a pipe over the wrench to get more tension and put all your weight ioion it ITS TIME TO RIDE....
Florida Joined: A long time ago... Posts: 2593 Location: Gainesville	Date: 2007-01-16 00:46:07 Topic: Re: Pedals.
	S&M makes cranks? and yeh its a bitch getting stuff pedals out, primo cranks are the worst because they either strip or the insert comes out with the pedal. and yeh, your best bet is go to a shop if you are friends with them (if your not they might charge you) they will have long pipes and know which way to turn it. "Yea though I walk through the valley of the shadow of death, I fear no one - for I am the meanest motherfucker in the valley"~PATTON
fraust Joined: A long time ago... Posts: 291 Location:	Date: 2007-01-24 12:33:26 Topic: Re: Pedals.
fraust Joined: A long time ago... Posts: 291 Location:	I'm pretty sure S&M makes cranks. They come on the Fit Flow series bikes.
Sponsored Results

New Thread