Parts

adapter for profile sprocket =| ?

Related Searches:
duffshoe7 Joined: A long time ago... Posts: 2169 Location: PA	Date: 2006-10-29 16:25:16 Topic: adapter for profile sprocket =\| ?
	is there a adapter for the profile imperial sporcket that fits a 22mm spindle? cuz i got one from a shop,and it only came with the 19mm,and i forgot to think about that i have a 22,and i went to the shop and they said they didnt have one that fit,and that it fits without one,even though its a little loose whats the deal? Just to get by,we keepin it fly.
hren Joined: A long time ago... Posts: 12 Location:	Date: 2006-10-29 17:16:34 Topic: Re: adapter for profile sprocket =\| ?
hren Joined: A long time ago... Posts: 12 Location:	I highly doubt you'll make it work with 22 mm spindle, sorry. The reason for this is that Profile sprockets are natuarally 7/8" (22.2 mm) and come with adapter for 19 mm spindle You can only put it on a bike and deal with that "loose" position. Sorry my English isn't superb.
duffshoe7 Joined: A long time ago... Posts: 2169 Location: PA	Date: 2006-10-29 20:10:48 Topic: Re: adapter for profile sprocket =\| ?
	nah its fine im so mad,the bike shop is like in a different state,i knew i shouldnt have gotten it =\|,im gonna see if i can fidn the recite,maybe take it back if i can Just to get by,we keepin it fly.
bullyhotrod86jh Joined: A long time ago... Posts: 663 Location: qld, Australia	Date: 2006-10-29 21:56:17 Topic: Re: adapter for profile sprocket =\| ?
	just a thought, if it is the 22.2mm by rights it should fit but you do have the option of drilling it out to 23.8 and getting an adapter from there. But i don't believe that is right as i believe it is 23.8, which means you can get a different hat washer to step it down, the other thing ou can do if it is 22.2mm, which i doubt. Is you get an old soda can, and cut a strip about 5mm diameter and wap it around, adjusting in length until suitable. i did this because i had sprocket but couldn't get an adapter for it anywhere, and it took me ages to get to a bike shop, that had the apropriate one in stock, so go and get those vernier calipers out, and anyway by right 0.2mm on the diameter is barely noticable and wouldn't actually matter. anyway i hope this helps, and maybe check up on a couple sites, as i believe it's about 23.8 but am not 100% on exact, so go cross check around before drilling anything out.
Sponsored Results

New Thread