Parts

pegs for GT pacman dropouts

Related Searches:
sugardaddy Joined: A long time ago... Posts: 155 Location: pittsburgh, pa	Date: 2006-07-28 21:51:58 Topic: pegs for GT pacman dropouts
	anyone know anything about those pegs that fit into the pac-man dropouts on gt frames? I don't do much flatland stuff online, I checked flatland fuel and dans comp, but i'm not really sure where to go from here. if anyone has used ones they're willing to part with, that'd be cool too, but I know that's more of an issue for the classifieds section, so i'm not gonna push it in here.
Stubbleduck43 Joined: A long time ago... Posts: 459 Location:	Date: 2006-07-28 21:55:08 Topic: Re: pegs for GT pacman dropouts
	I know the Odyssey Strong Island's will fit, but heavy as hell. The old knurled GT pegs will fit but hard to find. Even the tapered London's will work. http://www.myspace.com/stubbleduck
GTworldtour1986 Joined: A long time ago... Posts: 238 Location: Orlando, FL	Date: 2006-07-29 11:13:32 Topic: Re: pegs for GT pacman dropouts
	I am looking for some too, and from what I found, the Sequence pegs at FF will fit. The ones I am running now are the GT steel ones, and weigh a pound each. The Sequence ones only a half pound (for a pair)! I will save 2 pounds by switching pegs alone! The old GT pac man pegs that were not oversized like mine are 1.5 inchs in diameter. That is what the inside diameter is for mine, so since the Sequence pegs are 1.5 inch, they should fit. Actually I guess any 1.5 peg would fit. If u stop riding, u will die.
bullyhotrod86jh Joined: A long time ago... Posts: 663 Location: qld, Australia	Date: 2006-07-29 17:27:29 Topic: Re: pegs for GT pacman dropouts
	requesting more pics of the above bike please? :-D
midwestside Joined: A long time ago... Posts: 604 Location: Greensboro, NC	Date: 2006-07-29 18:33:03 Topic: Re: pegs for GT pacman dropouts
	Ive got some hoffman day smith pegs that taper pretty narrow. Brand new in the bag.
GTworldtour1986 Joined: A long time ago... Posts: 238 Location: Orlando, FL	Date: 2006-07-29 18:58:16 Topic: Re: pegs for GT pacman dropouts
	I put a bunch in "post a pic of your bike (FLAT)" forum not too long ago. So if you want you can check more out there. If u stop riding, u will die.
flatchance Joined: A long time ago... Posts: 233 Location:	Date: 2006-07-30 13:25:19 Topic: Re: pegs for GT pacman dropouts
flatchance Joined: A long time ago... Posts: 233 Location:	small diameter techna's or 88s may work also if the dropout gives you half an inch .
Sponsored Results

New Thread