Free BMX Classifieds

Joined: A long time ago...

Sellin complete bike for 300 w/o shipping......





FRAME: 100% Cr-Mo, 40mm TT/DT, euro BB, internally relieved No Oval head tube, weld-on rotor plate, dual lower brake cable routing, 6mm drop-outs for 14mm axle

FORK: Cr-Mo 1-1/4” blades, reinforced steer, 6mm drop-outs for 14mm axle with 38mm OD Safety washers

HEADSET: 1-1/8” threadless, sealed loose ball bearing

ROTOR SST Oryg with dual cable amplifier

STEM: Forged alloy, 55mm reach, top-load

HANDLEBARS: 100% Cr-Mo 2-piece, 195mm rise x 620 width, 10 deg. backsweep, 5 deg. upsweep

TAPE / GRIPS: Specialized no-flange Kraton, 130mm

BRAKES: Rear only: Dia-Tech 996 "Hombre" U-brake, dual quick release arms

BRAKE LEVERS: Tektro “U-Brake” alloy, two finger

FREEWHEEL: Odyssey, 1/2x1/8x13t for M-30 thread(left side)

CHAIN: KMC Z-510H

CRANKSET: Truvativ Luftalarm XR, AL-7050, L & R drive compatible, 175mm

CHAINRING: CNC cut 5mm thick 7075, 1/2” x 1/8”x 36t

BOTTOM BRACKET: Truvativ Giga Pipe BMX, 68x113mm ISIS spline, Cr-Mo spindle, Alloy cups with 4x sealed cartridge bearing

PEDALS: Alloy platform, 9/16” spindle Cr-Mo spindle with molded pins

RIMS Front: SUN Rhyno Lite XL, 20x1.75" double wall, eyelets. Rear: SUN Rhyno Lite XL L7, 20" double wall, CNC sidewalls, eyelets

FRONT HUB: Specialized 36 hole, alloy shell, mid flange, hollow 14mm Cr-Mo axle, double sealed loose ball

REAR HUB: Specialized 36 hole, “Flip-side Freewheel” L&R side M-30 f/w threads, alloy shell, mid flange, hollow 14mm Cr-Mo axle, 4x sealed cartridge bearings

SPOKES: 2.0mm (14g) stainless steel, brass nipples, L189/R189mm front, L186/R186mm rear

FRONT TIRE: Specialized “Compound” Sport, 30tpi, 20x2.0"

REAR TIRE: Specialized “Compound” Sport, 30tpi, 20x2.0"

TUBES: 20x 2.0" schraeder valve

SADDLE Specialized Jumping with 8mm rails and X-Brace

SEAT POST: Alloy micro adjust, 30.9mm/300mm for 8mm rails

SEAT BINDER: Forged alloy single bolt design 33.3 x 31.3mm