Bikepark

Need some tips for a half pipe

Related Searches:
WestshoreBMX Joined: A long time ago... Posts: 104 Location: Victoria B.C.	Date: 2005-01-26 20:39:13 Topic: Need some tips for a half pipe
	me and my friends are gonna build a halfpipe and we have no idea for good measurments. Do you guys have any suggestions for sizes? like length,height, things like that? We want something you can air out of but also launch and stall on it, aswell as grind. nothing that gives you vert stuff.... We have some plans layed out but im not sure if its gonna work good #1 - this aint the 60's anymore.. u can lose those bell bottoms.. #2 - this aint the 30's anymore.. quit being a Nazi. Best...thing....ever
FlatRider4Life Joined: A long time ago... Posts: 8588 Location: Iowa	Date: 2005-01-26 20:42:34 Topic: Need some tips for a half pipe
	you need about 5ft to be able to do doublepeg and feeble stalls on, but u could have a 3footer but it would be hard unless u got some vert on it. i think 5ft is about a good size, when u get better at it u can always make it a little bigger
WestshoreBMX Joined: A long time ago... Posts: 104 Location: Victoria B.C.	Date: 2005-01-26 21:04:43 Topic: Need some tips for a half pipe
	cool thanks :D #1 - this aint the 60's anymore.. u can lose those bell bottoms.. #2 - this aint the 30's anymore.. quit being a Nazi. Best...thing....ever
ryno115 Joined: A long time ago... Posts: 101 Location:	Date: 2005-01-26 22:17:04 Topic: Need some tips for a half pipe
ryno115 Joined: A long time ago... Posts: 101 Location:	i was planning on building one too and was wondering is it better to have coping or not?
Joined: Posts: Location:	Date: 2005-01-27 08:58:17 Topic: Need some tips for a half pipe
Joined: Posts: Location:	For me no, for you maybe... It depends if your goiong to want to grind plywood doesnt grind :lol:
HMBMX Joined: A long time ago... Posts: 108 Location: half moon bay, california	Date: 2005-01-27 10:44:59 Topic: Need some tips for a half pipe
	i have built a four foot half pipe, a spine and a kicker and landing. my half pipe is i think 12 feet wide and for just skrewing around on it's fine but it is a little skinny. i dont use coping but i also dont use pegs. my pipe is really warped but still rideable but not skateable, haha silly plank pushers. if you need some more help pm me or whatever. and it's going to cost more than you think. why are all garages just a few feet to small to ride in?
fbmx Joined: A long time ago... Posts: 136 Location:	Date: 2005-01-27 10:49:33 Topic: Need some tips for a half pipe
fbmx Joined: A long time ago... Posts: 136 Location:	I like 4' minis to play around on but a steep 5' is probably the most fun. Make it a 7.5' tranny or so. It's personal preference but I like them steep. A 4' with an 8' tranny is good for a hip or something but you have to lean so far over to peg stall it's not that fun.
FlatRider4Life Joined: A long time ago... Posts: 8588 Location: Iowa	Date: 2005-01-27 10:50:50 Topic: Need some tips for a half pipe
	we made a sketchy snow jump and quarter, 2 peice of plywood with snow on the first one, its like.. goes flat then BAM verticle almost, when u try to 180 it, it like kicks u out towards the landing so u land on the nose
twippin Joined: A long time ago... Posts: 201 Location: spencer ia	Date: 2005-01-27 14:17:53 Topic: Need some tips for a half pipe
	make a full pipe :lol: ThE tImE iS nOw RiDe
SHiTLUCK Joined: A long time ago... Posts: 285 Location: Arkinnsaw bitches	Date: 2005-01-27 14:22:59 Topic: Need some tips for a half pipe
	5 feet tall, 16-20 feet wide, 7-1/2 foot transition. Derrick Girard said: APE IT!!!
Sponsored Results

1 | 2 Next >>

New Thread